giant spider rat or bat boss monster miniature
by tbrianjonesPrints at 7–193 mm
Concept picture · not a photo of a printAt 28 mm: 33 mm (1.3 in) tall · 45 × 45 mm footprintAbout this miniature
This miniature is a giant spider boss monster, a heavy gothic arachnid caught mid-stride with its jaws gaping wide. The body is built from a ridged, plated abdomen rising high behind a broad, knobbed head. The head carries a cluster of rounded bumps across its brow and a pair of thick, solid chelicerae that open to reveal long, curved fangs. Each leg is articulated with heavy armoured plates at every joint, the segments thick and layered like plate armour, and the front legs reach down toward the ground with the tarsi pressing into the rubble. The knees are shaped to suggest weight and purpose, and the legs spread outward to give the figure a wide, menacing stance. The surface is deeply textured, with ridges and folds across the abdomen and knuckled plating along the limbs, while the base is a mound of cracked flagstones, broken rubble, and thick skulls and ribs pressed into the ground. The figure is shown in a worn, grim condition, with the bone-strewn base reinforcing its predatory, ruined setting. It suits fantasy RPG encounters, dungeon boss fights, and grimdark skirmish games as a centrepiece monster. For printing, the wide, splayed legs and the open fangs will need supports, and the fine rubble and bone details on the base benefit from a resin printer. The round base is flat and stable, making it easy to mount and paint.
Printed and painted by the community
None yet
Nobody has printed or painted this one yet.Only photos a moderator has accepted show here.
- JPEG, PNG or WebP, up to 25 MB. Location and camera details are stripped from the file before anyone sees it.
- Up to 3 photos of this model per member.
- A moderator looks at every photo before it appears, usually within two business days.
- Ask us to take a photo down and we will; you cannot remove one yourself.
Verify your print · 3 photos · earns 100 tokens
Printed this?Earns 100 tokens, worth $1.00, once a moderator accepts it, and counts toward this model's verification. 3 photos, front, side and back.Sign in to upload photos
For printer owners
Watertightness not recorded · needs supports · 9 g PLA at 28 mm
Height32.7 mm (1.3 in) at 28 mm
Footprint45 × 45 mm
Material≈ 9 g PLA, farm estimate
MeshRepaired; watertightness not recorded
SupportsTagged: supports required (not measured)
Sizes in this file
At 28 mm: Thinnest feature 0.01 mm. 95% of walls above 0.66 mm. Supports add a flat fee to a farm print, which is why small pieces are modelled without them.28 mm32.7 mm (1.3 in)9 g$3.80 printed
Thinnest feature 0.01 mm. 95% of walls above 0.66 mm. about 1 h 29 min to print · flat base 1583 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.4 mm on the 28 mm piece54 mm63 mm (2.5 in)42 g$7.58 printed
Thinnest feature 0.01 mm. 95% of walls above 1.3 mm. about 3 h 20 min to print · flat base 5888 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.21 mm on the 28 mm piece35 mm40.8 mm (1.6 in)15 g$4.48 printed
Thinnest feature 0.01 mm. 95% of walls above 0.83 mm. about 1 h 49 min to print · flat base 2474 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.32 mm on the 28 mm piece32 mm37.3 mm (1.5 in)12 g$4.17 printed
Thinnest feature 0.01 mm. 95% of walls above 0.76 mm. about 1 h 40 min to print · flat base 2068 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.35 mm on the 28 mm piece15 mm17.5 mm (0.7 in)2 gFile only
95% of walls above 0.36 mm. about 1 h 7 min to print · flat base 454 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.75 mm on the 28 mm piece10 mm11.7 mm (0.5 in)1 gFile only
95% of walls above 0.24 mm. about 1 h 2 min to print · flat base 202 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 1.12 mm on the 28 mm piece6 mm7 mm (0.3 in)File only
95% of walls above 0.14 mm. about 1 h 0 min to print · flat base 73 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 1.87 mm on the 28 mm pieceWhat a buyer may do
Print, remix, have it painted; not sell
Print it
Remix it
Sell it
Commission a painter
- You can print this for your own table.
- You can remix it here and make it yours.
- Only the creator and B&B Gaming can sell it.
Have it paintedPick a painter, see the price with every share laid out, or ask for a quote.Have it painted
Tags
fantasy · grimdark · fantasy RPG · +17
Setting · fantasySetting · grimdarkGame fit · fantasy RPGGame fit · skirmish wargameRole · centerpieceFootprint · smallBiome · undergroundEra · dark ageCondition · ruinedCondition · weatheredPrintability · fine detailPrintability · flat basePrintability · supports requiredStyle · grimdarkStyle · realisticmood · eeriemood · ominousmaterial · bonematerial · stonecompatibility · magnetic base
Versions, remixes and provenance
v1
Remix ittbrianjones allows remixes. A remix gets the pictures, views and sculpts to keep working from (never the chat or the files), credits this model, and pays 3% of its creator share back to it.Remixing copies this model into your own workspace to keep working from. Downloading this model's own file still means buying it, at $2.00; a remix you publish sells its own file at its own price.Starts a new project from this one. The original creator earns a share of anything you sell.
Versions · 1v1 · Oct 22, 2026 · currentBuyers keep what they bought and get every later version at no extra cost. A remix stays pinned to the version it came from.
ProvenanceModel id metzct · published Oct 22, 2026Cost to make $1.24 · licence marketplace v1Size class small: how big it is on the table, which is what a painter charges by
Related models
Licence: Print it ✓ · Remix it ✓ · Sell it ✗Frost-Cracked Ice GateSTL $2.00 · Print $42.13est.
tbrianjones
Licence: Print it ✓ · Remix it ✓ · Sell it ✗Glacier Giant's Iron TombSTL $2.00 · Print $51.07est.
tbrianjones
Licence: Print it ✓ · Remix it ✓ · Sell it ✗Regal Teenage DragonSTL $2.00 · Print $14.30–16.67est.
tbrianjones
Licence: Print it ✓ · Remix it ✓ · Sell it ✗Vampire Bard with Twin DaggersSTL $2.00 · Print $3.16est.
tbrianjones
Painting guides
Step by step, with a picture for each step and the colours to use.