Regal Teenage Dragon
by tbrianjonesPrints at 4–100 mm
Concept picture · not a photo of a printAt 28 mm: 83 mm (3.3 in) tall · 86 × 88 mm footprintAbout this terrain piece
This piece shows a dragon standing on all four legs, its body bulked with scaled armour-like plating. The wings are folded tight against the flanks, their long finger bones and membranes still visible along the back. The head is raised and turned, with a crown of swept horns and a pair of curved brow spikes above a heavy snout and open jaw. Scales cover the neck, shoulders and haunches in overlapping plates, each with a crisp ridge line. The forelegs are planted square, with clawed toes gripping the ground. The long, heavy tail runs back from the hindquarters, curls around on the base, and ends in a barbed tip raised off the surface. The base is a rough, uneven oval of stone and earth with small rocks and cracks, giving the dragon something to stand and coil on. The condition is intact and freshly made, with no weathering. On the table it works as a large monster or boss marker, a stand-alone centrepiece that blocks line of sight across open ground. For printing, the folded wings and the raised tail tip need supports underneath, and the fine scale ridges and claws are best printed upright on a resin machine.
Printed and painted by the community
None yet
Nobody has printed or painted this one yet.Only photos a moderator has accepted show here.
- JPEG, PNG or WebP, up to 25 MB. Location and camera details are stripped from the file before anyone sees it.
- Up to 3 photos of this model per member.
- A moderator looks at every photo before it appears, usually within two business days.
- Ask us to take a photo down and we will; you cannot remove one yourself.
Verify your print · 3 photos · earns 100 tokens
Printed this?Earns 100 tokens, worth $1.00, once a moderator accepts it, and counts toward this model's verification. 3 photos, front, side and back.Sign in to upload photos
For printer owners
Watertightness not recorded · needs supports · 54 g PLA at 28 mm
Height83.3 mm (3.3 in) at 28 mm
Footprint86 × 88 mm
Material≈ 54 g PLA, farm estimate
MeshRepaired; watertightness not recorded
SupportsTagged: supports required (not measured)
Sizes in this file
At 28 mm: Thinnest feature 0.01 mm. 95% of walls above 1.9 mm. Supports add a flat fee to a farm print, which is why small pieces are modelled without them.28 mm83.3 mm (3.3 in)54 g$8.91 printed
Thinnest feature 0.01 mm. 95% of walls above 1.9 mm. about 3 h 58 min to print · flat base 5504 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.4 mm on the 28 mm piece54 mm160.7 mm (6.3 in)281 g$34.90 printed
Thinnest feature 0.01 mm. 95% of walls above 3.7 mm. about 16 h 35 min to print · flat base 20473 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.21 mm on the 28 mm piece35 mm104.2 mm (4.1 in)93 g$13.41 printed
Thinnest feature 0.01 mm. 95% of walls above 2.4 mm. about 6 h 9 min to print · flat base 8601 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.32 mm on the 28 mm piece32 mm95.2 mm (3.7 in)74 g$11.28 printed
Thinnest feature 0.01 mm. 95% of walls above 2.2 mm. about 5 h 8 min to print · flat base 7189 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.35 mm on the 28 mm piece15 mm44.6 mm (1.8 in)12 g$4.19 printed
95% of walls above 1.0 mm. about 1 h 41 min to print · flat base 1580 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 0.75 mm on the 28 mm piece10 mm29.8 mm (1.2 in)5 g$3.35 printed
95% of walls above 0.68 mm. about 1 h 16 min to print · flat base 702 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 1.12 mm on the 28 mm piece6 mm17.9 mm (0.7 in)1 gFile only
95% of walls above 0.41 mm. about 1 h 4 min to print · flat base 253 mm² · smallest detail on a typical 0.4 mm nozzle and 0.2 mm layers: 1.87 mm on the 28 mm pieceWhat a buyer may do
Print, remix, have it painted; not sell
Print it
Remix it
Sell it
Commission a painter
- You can print this for your own table.
- You can remix it here and make it yours.
- Only the creator and B&B Gaming can sell it.
Have it paintedPick a painter, see the price with every share laid out, or ask for a quote.Have it painted
Tags
fantasy · fantasy battle wargame · fantasy RPG · +16
Setting · fantasyGame fit · fantasy battle wargameGame fit · fantasy RPGRole · LOS blockerRole · obstacleFootprint · mediumNatural feature · rockCondition · pristinePrintability · fine detailPrintability · flat basePrintability · resin-recommendedPrintability · supports requiredStyle · hand-sculptedStyle · realisticmood · epicmood · ominousmaterial · scalematerial · stonecompatibility · magnetic base
Versions, remixes and provenance
v1
Remix ittbrianjones allows remixes. A remix gets the pictures, views and sculpts to keep working from (never the chat or the files), credits this model, and pays 3% of its creator share back to it.Remixing copies this model into your own workspace to keep working from. Downloading this model's own file still means buying it, at $2.00; a remix you publish sells its own file at its own price.Starts a new project from this one. The original creator earns a share of anything you sell.
Versions · 1v1 · Oct 23, 2026 · currentBuyers keep what they bought and get every later version at no extra cost. A remix stays pinned to the version it came from.
ProvenanceModel id fkrzc6 · published Oct 23, 2026Cost to make $0.71 · licence marketplace v1Size class medium: how big it is on the table, which is what a painter charges by
Related models
Licence: Print it ✓ · Remix it ✓ · Sell it ✗giant spider rat or bat boss monster miniatureSTL $2.00 · Print $9.19–9.55est.
tbrianjones
Licence: Print it ✓ · Remix it ✓ · Sell it ✗Ice Giant TempleSTL $2.00 · Print $110.06est.
tbrianjones
Licence: Print it ✓ · Remix it ✓ · Sell it ✗Vampire Bard with Twin DaggersSTL $2.00 · Print $3.16est.
tbrianjones
Licence: Print it ✓ · Remix it ✓ · Sell it ✗Gnarled Half-Dead OakSTL $2.00 · Print $14.88–17.50est.
tbrianjones